Chillers

Chillers

Silica gel chillers:
Tried and tested.

Our silica gel based chillers have proven themselves in hundreds of installations around the world. Whether in the moderate climates of Northern Europe, the scorching sun of the Arabic desert, or the tropical humidity of South East Asia, our established adsorption chillers work reliably day in and day out. Driven by waste heat at temperatures from as low as 50°C up to 95°C, they are the reliable core of many different applications.

Model Temperature ranges Cooling capacity (nominal) Electrical power consumption Footprint Extra components
eCoo 10 Hot water 50 – 95°C
Re-cooling 22 – 40°C
Chilled water 8 – 21°C
up to 16.7 kW 260 – 684 W 0.67 m2  
eCoo 10X up to 25 kW 511 – 911 W 0.67 m2  
eCoo 10X ST up to 25 kW 626 – 1,371 W 1.28 m2 Integrated circuit separation
eCoo 20 up to 33,4 kW 520 – 1,368 W 1.28 m2  
eCoo 20X up to 50 kW 1,022 – 1,822 W 1.28 m2  
eCoo 30 ST up to 50 kW 645 – 2,140 W 1.63 m2 Integrated circuit separation
eCoo 30X up to 75 kW 1,543 – 2,743 W 1.89 m2  
eCoo 40X up to 100 kW 2,064 – 3,664 W 2.56 m2  

Zeolite based adsorption chillers:
The pinnacle of technological development.

Zeolite is a crystalline, environmentally harmless mineral which is particularly well suited for adsorption applications: It takes in, i.e. adsorbs, water vapor, thereby creating cold, and which releases the vapor again when heated.

The way we apply the zeolite is particularly innovative: Our proprietary and patented process causes zeolite crystals to grow directly out of the surface and can therefore reach a maximum surface area (read more about this process here).

Model Temperature ranges Cooling capacity (nominal) Electrical power consumption Footprint Extra components
Zeo M 10          
Zeo M 20   Market launch in Q2/2018      
Zeo M 30          
Zeo M 40          

The HybridChiller:
When adsorption meets compression.

Our HybridChiller is the first unit on the market to integrate adsorption and compression cooling. It contains a compression chiller to cover peak loads or fluctuations in the available drive heat. The integrated controller ensures that all components co-operate optimally in all operating conditions.

The HybridChiller is available as an option with all our adsorption chillers.

Model Temperature ranges Cooling capacity (nominal) ESEER* Footprint Extra components
eCoo 10 HC 30 Hot water 50 – 95°C
Re-cooling 22 – 40°C
Chilled water 8 – 21°C
up to 46.7 kW
(of which up to 30 kW via compression)
19.6 1.32 m2 Integrated circuit separation
eCoo 20 HC 60 Hot water 50 – 95°C
Re-cooling 22 – 40°C
Chilled water 8 – 21°C
up to 91.4 kW
(of which up to 58 kW via compression)
19.6 1.63 m2 Integrated circuit separation

Examples – additional models upon request.

FAHRENHEIT HybridChiller

Haven’t found exactly what you are looking for?

We can customize our products and technology to suit pretty much any special request: More capacity, tailored enclosures, particular controllers or other modifications – just contact us!